grub2 2.12-ok1.13 source package in openKylin

 This package contains common files shared by the distinct flavours of GRUB.
 It is shared between GRUB Legacy and GRUB 2, although a number of files
 specific to GRUB 2 are here as long as they do not break GRUB Legacy.
 .
 grub-mkrescue needs the suggested packages mtools (for UEFI targets) and
 xorriso.

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This is a dependency package for a version of GRUB that has been built for
 use with platforms running the Coreboot firmware. Installing this package
 indicates that this version of GRUB should be the active boot loader.

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This package contains GRUB modules that have been built for use with
 platforms running the Coreboot firmware. It can be installed in parallel
 with other flavours, but will not automatically install GRUB as the active
 boot loader nor automatically update grub.cfg on upgrade unless
 grub-coreboot is also installed.

 This package contains debugging files for grub-coreboot-bin. You only need
 these if you are trying to debug GRUB using its GDB stub.

 This is a dummy package that depends on the grub-efi-$ARCH package most likely
 to be appropriate for each architecture.

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This is a dependency package for a version of GRUB that has been built for
 use with the EFI-AMD64 architecture, as used by Intel Macs (unless a BIOS
 interface has been activated). Installing this package indicates that this
 version of GRUB should be the active boot loader.

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This package contains GRUB modules that have been built for use with the
 EFI-AMD64 architecture, as used by Intel Macs (unless a BIOS interface has
 been activated). It can be installed in parallel with other flavours, but
 will not automatically install GRUB as the active boot loader nor
 automatically update grub.cfg on upgrade unless grub-efi-amd64 is also
 installed.

 This package contains debugging files for grub-efi-amd64-bin. You only
 need these if you are trying to debug GRUB using its GDB stub.

 This package contains template files for grub-efi-amd64-signed.
 This is only needed for Secure Boot signing.

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This is a dependency package for a version of GRUB that has been built for
 use on ARM64 systems with UEFI. Installing this package indicates that
 this version of GRUB should be the active boot loader.

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This package contains GRUB modules that have been built for use on ARM64
 systems with UEFI. It can be installed in parallel with other flavours,
 but will not automatically install GRUB as the active boot loader nor
 automatically update grub.cfg on upgrade unless grub-efi-arm64 is also
 installed.

 This package contains debugging files for grub-efi-arm64-bin. You only
 need these if you are trying to debug GRUB using its GDB stub.

 This package contains template files for grub-efi-arm64-signed.
 This is only needed for Secure Boot signing.

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This is a dependency package for a version of GRUB that has been built for
 use with the EFI-IA32 architecture, as used by Intel Macs (unless a BIOS
 interface has been activated). Installing this package indicates that this
 version of GRUB should be the active boot loader.

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This package contains GRUB modules that have been built for use with the
 EFI-IA32 architecture, as used by Intel Macs (unless a BIOS interface has
 been activated). It can be installed in parallel with other flavours, but
 will not automatically install GRUB as the active boot loader nor
 automatically update grub.cfg on upgrade unless grub-efi-ia32 is also
 installed.

 This package contains debugging files for grub-efi-ia32-bin. You only need
 these if you are trying to debug GRUB using its GDB stub.

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This is a dependency package for a version of GRUB that has been built for
 use on LoongArch 64-bit systems with UEFI. Installing this package indicates that
 this version of GRUB should be the active boot loader.

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This package contains GRUB modules that have been built for use on loong64
 systems with UEFI. It can be installed in parallel with other flavours,
 but will not automatically install GRUB as the active boot loader nor
 automatically update grub.cfg on upgrade unless grub-efi-loong64 is also
 installed.

 This package contains debugging files for grub-efi-loong64-bin. You only
 need these if you are trying to debug GRUB using its GDB stub.

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This is a dependency package for a version of GRUB that has been built for
 use on RISC-V 64-bit systems with UEFI. Installing this package indicates that
 this version of GRUB should be the active boot loader.

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This package contains GRUB modules that have been built for use on riscv64
 systems with UEFI. It can be installed in parallel with other flavours,
 but will not automatically install GRUB as the active boot loader nor
 automatically update grub.cfg on upgrade unless grub-efi-riscv64 is also
 installed.

 This package contains debugging files for grub-efi-riscv64-bin. You only
 need these if you are trying to debug GRUB using its GDB stub.

 This package contains grub-emu, an emulated version of GRUB. It is only
 provided for debugging purposes.

 This package contains debugging files for grub-emu. You only need these if
 you are trying to debug GRUB using its GDB stub.

 This package contains a binary of GRUB that has been built for use as
 firmware for QEMU. It can be used as a replacement for other PC BIOS
 images provided by seabios, bochsbios, and so on.
 .
 In order to make QEMU use this firmware, simply add `-bios grub.bin' when
 invoking it.
 .
 This package behaves in the same way as GRUB for coreboot, but doesn't
 contain any code from coreboot itself, and is only suitable for QEMU. If
 you want to install GRUB as firmware on real hardware, you need to use the
 grub-coreboot package, and manually combine that with coreboot.

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This is a dependency package for a version of GRUB that has been built for
 use with Open Firmware implementations. Installing this package indicates
 that this version of GRUB should be the active boot loader.

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This package contains GRUB modules that have been built for use with Open
 Firmware implementations. It can be installed in parallel with other
 flavours, but will not automatically install GRUB as the active boot loader
 nor automatically update grub.cfg on upgrade unless grub-ieee1275 is also
 installed.

 This package contains debugging files for grub-ieee1275-bin. You only
 need these if you are trying to debug GRUB using its GDB stub.

 This is a dummy transitional package that depends on grub-coreboot.

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
  - VESA-based graphical mode with background image support and complete 24-bit
    color set.
  - Support for extended charsets. Users can write UTF-8 text to their menu
    entries.
 .
 This is a dependency package for a version of GRUB that has been built for
 use with the traditional PC/BIOS architecture. Installing this package
 indicates that this version of GRUB should be the active boot loader.

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
  - VESA-based graphical mode with background image support and complete 24-bit
    color set.
  - Support for extended charsets. Users can write UTF-8 text to their menu
    entries.
 .
 This package contains GRUB modules that have been built for use with the
 traditional PC/BIOS architecture. It can be installed in parallel with
 other flavours, but will not automatically install GRUB as the active boot
 loader nor automatically update grub.cfg on upgrade unless grub-pc is also
 installed.

 This package contains debugging files for grub-pc-bin. You only need these
 if you are trying to debug GRUB using its GDB stub.

 This package contains three GRUB rescue images that have been built for use
 with the traditional PC/BIOS architecture:
 .
  - grub-rescue-floppy.img: floppy image.
  - grub-rescue-cdrom.iso: El Torito CDROM image.
  - grub-rescue-usb.img: USB image.

 This is the default theme for GRUB's graphical menu.

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This is a dependency package for a version of GRUB that has been built for
 use with the Xen hypervisor (i.e. PV-GRUB). Installing this package
 indicates that this version of GRUB should be the active boot loader.

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This package contains GRUB modules that have been built for use with the
 Xen hypervisor (i.e. PV-GRUB). It can be installed in parallel with other
 flavours, but will not automatically install GRUB as the active boot loader
 nor automatically update grub.cfg on upgrade unless grub-xen is also
 installed.

 This package contains debugging files for grub-xen-bin. You only need
 these if you are trying to debug GRUB using its GDB stub.

 GRUB is a portable, powerful bootloader. This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub. Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This package arranges for GRUB binary images which can be used to boot a Xen
 guest (i.e. PV-GRUB) to be present in the control domain filesystem.

 This is a dummy transitional package to handle GRUB 2 upgrades. It can be
 safely removed.

 This package contains common files shared by the distinct flavours of GRUB.
 The files in this package are specific to GRUB 2, and would break GRUB
 Legacy if installed on the same system.