amd64 build of libime 0.0~git20191230.5b6e890+ds2-ok1 in openkylin yangtze PROPOSED
created
Build status
Successfully built
on docker-amd64-0.66-8223
- Started
- Finished (took 2 minutes, 16.0 seconds)
- buildlog (38.0 KiB)
- libime_0.0~git20191230.5b6e890+ds2-ok1_amd64.changes (4.1 KiB)
Build details
- Archive:
- Primary Archive for openKylin
- Series:
- Yangtze V1.0
- Architecture:
- amd64
- Pocket:
- Proposed
- Component:
- main
Binary packages
Binary packages produced by this build:
- libime-bin 0.0~git20191230.5b6e890+ds2-ok1
- libime-data 0.0~git20191230.5b6e890+ds2-ok1
- libimecore-dev 0.0~git20191230.5b6e890+ds2-ok1
- libimecore0 0.0~git20191230.5b6e890+ds2-ok1
- libimepinyin-dev 0.0~git20191230.5b6e890+ds2-ok1
- libimepinyin0 0.0~git20191230.5b6e890+ds2-ok1
- libimetable-dev 0.0~git20191230.5b6e890+ds2-ok1
- libimetable0 0.0~git20191230.5b6e890+ds2-ok1
Built files
Files resulting from this build:
- libime-bin_0.0~git20191230.5b6e890+ds2-ok1_amd64.deb (148.3 KiB)
- libime-data_0.0~git20191230.5b6e890+ds2-ok1_all.deb (27.3 MiB)
- libimecore-dev_0.0~git20191230.5b6e890+ds2-ok1_amd64.deb (15.6 KiB)
- libimecore0_0.0~git20191230.5b6e890+ds2-ok1_amd64.deb (169.2 KiB)
- libimepinyin-dev_0.0~git20191230.5b6e890+ds2-ok1_amd64.deb (11.7 KiB)
- libimepinyin0_0.0~git20191230.5b6e890+ds2-ok1_amd64.deb (125.5 KiB)
- libimetable-dev_0.0~git20191230.5b6e890+ds2-ok1_amd64.deb (10.7 KiB)
- libimetable0_0.0~git20191230.5b6e890+ds2-ok1_amd64.deb (87.1 KiB)
