pulseaudio 1:16.1+dfsg1-ok3 source package in openKylin

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Headers and libraries for developing applications that access a PulseAudio
 sound server via PulseAudio's native interface.

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Client libraries used by applications that access a PulseAudio sound server
 via PulseAudio's native interface.
 .
 This package adds support for glib2 client applications.

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Client libraries used by applications that access a PulseAudio sound server
 via PulseAudio's native interface.

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 These are some of PulseAudio's features:
 .
   * High quality software mixing of multiple audio streams with support for
     more than one sink/source. May be used to combine multiple sound cards
     into one (with sample rate adjustment).
 .
   * Wide range of supported client libraries. ESD, ALSA, oss, libao and
     GStreamer client applications are supported as-is. Native PulseAudio
     plug-ins are also available for xmms and mplayer.
 .
   * Good low latency behaviour and very accurate latency measurement for
     playback and recording. Ability to fully synchronize multiple playback
     streams.
 .
   * Network transparency, allowing an application to play back or record
     audio on a different machine than the one it is running on.
 .
   * Extensible plug-in architecture with plug-ins for jackd, multicast-rtp
     lirc and avahi, just to name a few.
 .
 This package contains the daemon and basic module set.

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package provides an equalizer sink and an interface to configure the
 equalizer, qpaeq.
 .
 The module is called module-equalizer-sink.

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to work with bluetooth devices, like headset
 or audio gateway.
 .
 The module is called module-bluetooth

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to store additional configuration in GSettings.
 It supersedes the gconf module.
 .
 The module is called module-gsettings.

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 These modules enables PulseAudio to connect to a jackd daemon.
 .
 The modules are called module-jack-sink, module-jack-source.

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables the volume of a PulseAudio sink to be controlled when
 buttons of an infrared remote control are pressed (through LIRC).
 .
 The module is called module-lirc.

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to stream audio to an Apple Airport Express.

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to publish available sinks and sources via
 zeroconf (aka. Avahi, mdns).
 .
 The module is called module-zeroconf-publish.

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 These tools provide command line access to various features of the
 PulseAudio sound server. Included tools are:
 .
   paplay - Playback a WAV file via a PulseAudio sink.
   pacat - Cat raw audio data to a PulseAudio sink.
   parec - Cat raw audio data from a PulseAudio source.
   pacmd - Connect to PulseAudio's built-in command line control interface.
   pactl - Send a control command to a PulseAudio server.
   padsp - /dev/dsp wrapper to transparently support OSS applications.
   pax11publish - Store/retrieve PulseAudio default server/sink/source
                  settings in the X11 root window.